Regulation 9

be made to the Commissioner of Building Control by the developer of those fixed installation works;

be in any form that may be required by the Commissioner of Building Control; and

contain any information that the Commissioner of Building Control may require.

the names and particulars of the plan submission QP appointed to prepare the plans of those fixed installation works;

the plans of the fixed installation works prepared in accordance with these Regulations;

if the fixed installation works relate to the installation of a lift (except a stairlift or vertical platform lift) — a type testing certificate (and accompanying documents) for the lift model of the lift and each safety component in that lift;

if the fixed installation works only involve replacing a safety component in a lift (except a stairlift or vertical platform lift) with a safety component that is not the same model or make originally involved in the lift (called in this regulation a new safety component) — a type testing certificate (and accompanying documents) for each new safety component;

a certificate issued by the plan submission QP, in the form and manner required by the Commissioner of Building Control, stating that the plan submission QP is satisfied that —

the plans for the fixed installation works comply with Division 3; and

any type testing certificate (including any accompanying document) mentioned in sub‑paragraphs (c) and (d) —

is valid;

corresponds with the plans for the fixed installation works;

is complete; and

complies with any other requirements that the Commissioner of Building Control may specify; and

the documents mentioned in paragraph (3).

the following plans of the fixed installation works prepared in accordance with these Regulations and any other requirements that the Commissioner of Building Control may, from time to time, specify:

any design plan;

any location plan;

any site plan;

a notification of the appointment of the plan submission QP who prepared the plans of the fixed installation works, signed by the person who made the appointment;

if an application has been made under regulation 45(1) for a modification or waiver of any requirement of these Regulations — a copy of the application;

if alternative solutions are to be utilised in respect of the fixed installation works —

a list of the alternative solutions; and

the certification of one or more specialists in the alternative solutions mentioned in regulation 21(2)(b)(ii), if obtained;

the specified documents for the fixed installation set out in the Second Schedule;

any other document that the Commissioner of Building Control may require, which may include a document showing the appointed fixed installation works contractor’s ability to install lifts imported from a particular supplier.