Singapore legislation
Regulation 31
of Guns, Explosives and Weapons Control (Guns) Regulations 2025
Regulation 31
Surveillance requirement
Subregulation 1
For the purposes of section 36(1)(b)(i) of the Act, a holder of a gun manufacturing licence or gun repair licence must apply the surveillance requirement to every watched zone specified in paragraph (2).
Subregulation 2
The watched zones for the purpose of paragraph (1) are the following parts of the gun factory or gun repair facility occupied by the licence holder concerned:
every part of those premises where the manufacture or repair of guns, or the manufacture of any gun parts or gun accessories, happens;
every entrance to, and exit (including an emergency exit) from, the part of those premises mentioned in sub‑paragraph (a);
every armoury and suitable room for keeping the guns, gun parts or gun accessories manufactured or repaired or to be manufactured or repaired;
every entrance to, and exit (including an emergency exit) from, any armoury and suitable room mentioned in sub‑paragraph (c);
where any firearm, firearm gun part or firearm accessory is or is to be manufactured or repaired, and the gun factory or gun repair facility is located within any grounds —
every gate and outer wall, fence or other structure or feature that marks the boundary of those grounds; and
every entrance to, and exit (including an emergency exit) from, those grounds by foot or by road;
every part of the gun factory or gun repair facility (as the case may be) where any gun, gun part or gun accessory is on display or is exhibited.
Subregulation 3
Where a holder of a gun repair licence repairs or takes part in the repair of any gun or gun accessory in premises that is not a gun repair facility occupied by the holder, the repair must, as far as practicable, take place in an area that has installed an electronic video surveillance system as to enable recording of the repair taking place at that area.