Skip to content

Singapore legislation

Regulation 5A

of Building Control (Buildability and Productivity) Regulations 2011

Regulation 5A

Submission of buildability detailed design and implementation plan for approval

Amended byS 335/2022 wef 30/04/2022S 335/2022 wef 30/04/2022S 335/2022 wef 30/04/2022S 335/2022 wef 30/04/2022S 729/2014 wef 01/11/2014

Subregulation 1

For the purposes of section 5(1) of the Act, the plans of building works for which an application for approval is to be made to the Commissioner of Building Control shall include the buildability detailed design and implementation plan.

Subregulation 2

Amended byS 335/2022 wef 30/04/2022S 335/2022 wef 30/04/2022S 335/2022 wef 30/04/2022S 335/2022 wef 30/04/2022S 729/2014 wef 01/11/2014

The buildability detailed design and implementation plan shall include the following:

(a)

the floor plan of each storey of the building (including any basement storey) that clearly marks out —

(i)

the structural floor area and wall length for every structural system and wall system of that storey;

(ii)

the area of any finishes for walls, floors and ceilings of that storey, indicating —

(A)

the types of finishes; and

(B)

the offsite finishes; and

(iii)

any buildable feature, including the area of every mechanical, electrical or plumbing system;

(b)

the roof plan of the building that clearly marks out —

(i)

the structural floor area and wall length for every structural system and wall system of the roof;

(ii)

the area of any finishes for walls, floors and ceilings of the roof, indicating —

(A)

the types of finishes; and

(B)

the offsite finishes; and

(iii)

any buildable feature, including the area of every mechanical, electrical or plumbing system;

(c)

the elevation plans and sectional plans of the building that clearly mark out —

(i)

the types of structural systems, wall system and buildable features, including the area of every mechanical, electrical or plumbing system; and

(ii)

the area of any finishes for walls, floors and ceilings of the building, indicating —

(A)

the types of finishes; and

(B)

the offsite finishes;

(d)

where applicable, the dimensions of the building components, the type and extent of repetition of prefabricated components, the connection and details of prefabricated components, details on the prefabricated reinforcement and the locations of all buildable features to be constructed for the building works;

(e)

such other details as may be required by the Commissioner of Building Control.