Regulation 13
CAB (Certification) to accept test conducted by CAB (Testing), etc.
of Consumer Protection (Conformity Assessment) Regulations 2025
Subregulation 1
Subject to paragraph (2), where a CAB (Certification) is requested to certify that a product conforms to the safety requirements specified by the Safety Authority under the Consumer Protection (Safety Requirements) Regulations, the CAB (Certification) must accept as correct a test report on that product issued by any CAB (Testing), CAB (Testing — MRA) or alternate testing laboratory.
Subregulation 2
A CAB (Certification) must not cause another test to be conducted unless it has reason to believe that any test that was used to produce a test report mentioned in paragraph (1) was —
improperly or incorrectly conducted; or
conducted at a time when —
the designation of the CAB (Testing) that conducted the test was suspended or withdrawn under —
the Enterprise Singapore Board (Conformity Assessment) Regulations 2018 (G.N. No. S 686/2018) as in force before 1 July 2025; or (B)these Regulations;
the designation of the CAB (Testing — MRA) that conducted the test was suspended or withdrawn by the country that designated it; or
the testing laboratory that conducted the test was no longer an alternate testing laboratory.