Workplace Safety and Health (Work at Heights) Regulations 2013 · reg 11

Suggest a correction

Tell us what is wrong in this text. We check every suggestion against the official version before we change anything.

What is wrong?Wrong or mistyped wordsWrong structure or numberingWrong title or detailsText that appears twice

What should change, and whyUp to 2,000 characters.The text as it should read (optional)

—(1) Where a fall arrest system is used in a workplace, it shall be the duty of the responsible person of any person who carries out or is to carry out at that workplace any work at height to ensure that —(a)the fall arrest system —(i)is of good construction, sound material and adequate strength;(ii)is free from patent defects; and(iii)is suitable and safe for the purpose for which it is intended;(b)every person using the fall arrest system is trained in the safe and correct use of the system; and(c)no part of the fall arrest system comes into contact with anything that could affect the safe use of the system.(2) Where a fall arrest system using a full-body harness is used in a workplace, it shall be the duty of the responsible person of any person who carries out or is to carry out at that workplace any work at height to ensure that —(a)the system incorporates a suitable means of absorbing energy and limiting the forces applied to the user’s body; and(b)in the event of a fall, there is enough fall clearance available to prevent the user from hitting an object, the ground or other surfaces.
Where a fall arrest system is used in a workplace, it shall be the duty of the responsible person of any person who carries out or is to carry out at that workplace any work at height to ensure that —(a)the fall arrest system —(i)is of good construction, sound material and adequate strength;(ii)is free from patent defects; and(iii)is suitable and safe for the purpose for which it is intended;(b)every person using the fall arrest system is trained in the safe and correct use of the system; and(c)no part of the fall arrest system comes into contact with anything that could affect the safe use of the system.
Where a fall arrest system using a full-body harness is used in a workplace, it shall be the duty of the responsible person of any person who carries out or is to carry out at that workplace any work at height to ensure that —(a)the system incorporates a suitable means of absorbing energy and limiting the forces applied to the user’s body; and(b)in the event of a fall, there is enough fall clearance available to prevent the user from hitting an object, the ground or other surfaces.

Edit the text above. Up to 20,000 characters.Where you checked it (optional)A link to the official version, if you have one.

The text as we hold it

Open the official text

reg 11Fall arrest system

(1)

Where a fall arrest system is used in a workplace, it shall be the duty of the responsible person of any person who carries out or is to carry out at that workplace any work at height to ensure that —

(a)

the fall arrest system —

(i)

is of good construction, sound material and adequate strength;

(ii)

is free from patent defects; and

(iii)

is suitable and safe for the purpose for which it is intended;

(b)

every person using the fall arrest system is trained in the safe and correct use of the system; and

(c)

no part of the fall arrest system comes into contact with anything that could affect the safe use of the system.

(2)

Where a fall arrest system using a full-body harness is used in a workplace, it shall be the duty of the responsible person of any person who carries out or is to carry out at that workplace any work at height to ensure that —

(a)

the system incorporates a suitable means of absorbing energy and limiting the forces applied to the user’s body; and

(b)

in the event of a fall, there is enough fall clearance available to prevent the user from hitting an object, the ground or other surfaces.

Subregulation 1

(a)