Regulation 1
Citation
These Regulations may be cited as the Manufacture of Optical Discs Regulations.
/akn/sg/act/sub_leg/2004/MODA-RG1
Manufacture of Optical Discs Regulations
The full official text, structured for quick navigation. Copy any provision or jump straight to a section.
- Type
- Subsidiary Legislation
- Status
- In force
- Enacted
- 2004
- Sections
- 6
Quick answer
About this subsidiary legislation
Manufacture of Optical Discs Regulations is Singapore Subsidiary Legislation, cited as Subsidiary Legislation MODA-RG1 2004, currently marked in force and first recorded in 2004.
Regulation 2
Duration of licences
Every licence shall be valid for a period of 5 years, unless the Registrar determines that a shorter period is appropriate in the circumstances of the case.
Regulation 3
Maintenance of records
Subregulation 1
Every licensee shall keep and maintain complete and accurate records of the following:
(a)
the persons who purchase from the licensee, and their orders for, the optical discs manufactured by the licensee;
(b)
the equipment in the licensed premises for the manufacture of optical discs;
(c)
the optical discs manufactured by the licensee;
(d)
the quantity of optical disc grade polycarbonate received at the licensed premises, the quantity of such material used by the licensee for the manufacture of optical discs, and the quantity of such material being disposed of and the manner of such disposal; and
(e)
the suppliers of the equipment referred to in sub-paragraph (b) and the material referred to in sub-paragraph (d).
Subregulation 2
The records referred to in paragraph (1) shall be retained for a period of not less than 5 years.
Regulation 4
Manufacturer’s codes
The manufacturer’s code to be assigned to a licensee under section 7(3)(a) of the Act shall be a source identification code under the source identification code system jointly developed by the International Federation of the Phonographic Industry and Philips International BV.
Regulation 5
Marking standards
Every manufacturer’s code assigned to a licensee shall comprise —
(a)
a mould code, which shall be engraved on every mould; and
(b)
a mastering code, which shall be hardwired on every laser beam recorder,such that the optical discs manufactured by the licensee will bear markings identifying the licensee.
Regulation 6
Fee
Amended byG.N. No. S 452/2004
Subregulation 1
The fee for the grant of a licence (other than a licence granted to an applicant referred to in section 32 of the Act) shall be $10, which is non-refundable.
Subregulation 2
Amended byG.N. No. S 452/2004
The Registrar may, in the circumstances of any particular case, waive the fee payable under paragraph (1).
Common questions
- What is Manufacture of Optical Discs Regulations?
- Manufacture of Optical Discs Regulations is Singapore Subsidiary Legislation, cited as Subsidiary Legislation MODA-RG1 2004, currently marked in force and first recorded in 2004.
- Is Manufacture of Optical Discs Regulations still in force?
- Yes — Manufacture of Optical Discs Regulations is currently in force.
- When did Manufacture of Optical Discs Regulations take effect?
- Manufacture of Optical Discs Regulations was first recorded in 2004.
- How many regulations does Manufacture of Optical Discs Regulations have?
- Manufacture of Optical Discs Regulations contains 6 regulations.
- Where can I read the official version of Manufacture of Optical Discs Regulations?
- The official text of Manufacture of Optical Discs Regulations is published at sso.agc.gov.sg.